R35 GT-R bellhousing and clutch on the bench at VOLKOV Motors
R35 GT-R · GR6

Bellhousing rattle, solved properly

We've seen bellhousings fail. So we do it once, do it properly, and back it with real-world results.

The problem

That knock or rattle at idle

Bellhousing rattle is one of the most common R35 GT-R issues: a knocking or rattling noise at idle or low speed. It comes from wear in the OEM bearings and internal clearances of the bellhousing, which drives the GR6 transmission.

Left alone, it gets worse as the internal wear increases.

Inside an R35 GT-R bellhousing
Our fix

Upgraded, not just replaced

Strip and inspect

We take the bellhousing apart and check every bearing and clearance.

Upgraded bearings

Not the cheap bearings fitted in the OEM bellhousing. We fit higher-grade bearings that have proven they hold: exactly what we run on Tiger.

Proven on Tiger

The last time we rebuilt Tiger's bellhousing was about three years ago. And you know what that car goes through.

Call 01234 331613Book your car in